Get more of such content, Weekly

* indicates required

A Brief Guide on Flow Switch and Its Working

Flow Switch

A flow switch, also known as a flow sensor or flow indicator, is a tool used to control the flow rate and pressure of fluids, air, or other gaseous media by a duct, system, or circuit.

These switches or sensors can control flow over a given time or continuously control total flow. Technically, a flow meter or sign might not certainly be a proper flow switch. If the tool only enrolls and shows data. It is more appropriately termed a meter or indicator.

In most states, though, they will stimulate actions or hold or excite other elements elsewhere in the system – pumps, for instance, to adjust the flow rate and pressure to the coveted and planned levels. This is then an exact flow switch.

How does a Flow Switch work?

To know how a flow switch works and what it does. It is helpful to outline the core elements that make up a typical switch or sensor of this type.

Many kinds will hold a paddle or magnetic trigger related to a loop and placed in the course by which fluid or gas is moving. This paddle is removed or pivoted by whatever material is running and gives a signal reading back to a secondary element known as the transducer.

The transducer takes this raw sign from the paddle and moves it onto a conductor in a clear format. The transmitter, in turn, regulates this reading against a predefined set of terms and does whatever sign or procedure is needed to adjust the way of elements and devices elsewhere.

In this way, flow switches can control, report, and regulate the flow rate of fluid or gas by a particular part of a system, or the complete procedure, assuring flow remains within those pre-set parameters. Suppose the velocity passes or drops under what is required. In that case, it can promptly trigger a series of activities such as initiating an alarm, powering on a pump, engaging flow, closing off parts of the system. These actions switch functions will rely completely on the switch and what it has been created for.

How to fit and test a Flow Switch?

Because there are so many various sorts of flow switches, as we will see in the following parts, there is also an extended series of flow switch fitting techniques and techniques. When seeming for the info non how to wire a flow switch. The most crucial thing is to know which kind of switch you are using and for what use.

Some essential rules of thumb are used to most flow switch fitting methods, however. These involve:

  • Fixing flow switches on a vertical part of pipe or duct
  • Assuring there is a reasonable length of straight pipe both in front of and after the switch. Ideally, the equivalent of 10x the pipe’s width.
  • Avoid fitting or wiring a flow switch near curves, other tools, valves, drains, narrower or broader parts of the pipe, and any other traits that may cause apparent changes in flow rate by this region.

Different kinds of Flow Switches

There are many kinds of flow switches available. Each will take a subtly but significantly. Different approaches include a linear, nonlinear, volumetric, or mass flow rate of fluids or gasses. Before purchasing or fitting a flow switch, it is essential to know which different kinds you require for the exact use you have in mind.

No single kind or brand of flow switch will do any or all flow switch tasks to a proper measure in any given state, so you will need to understand what kind you require for the precise purpose it is meant to work.


Choosing the right kind, size, voltage, and purpose of flow switch for the specific use you are placing is essential if you work precisely in the role you require to do. With such a wide array of goods and brands available, it can be a complex field to navigate, which is why we are always pleased to offer direction and advice through our multiple support channels.

Leave a Reply