6 Steps to Make Sure Your Air Conditioner is Ready for Summer

Before one begins to use the air conditioner, be it a split AC or a tower AC, during the summer, it is important to make sure that it is fine-tuned and ready for use. This ensures that it can work without malfunctioning and cool as required. Read on to know the 6 steps that ensure the healthy functioning of your AC. 

1. Stay Safe 

• Switch off the circuit breaker before beginning work on the AC system. 
• Turn off the power at the condenser. 
• Ensure that you have an experienced electrician do a safety check for the appliance. 

2. Clean and/or replace the filters 

Regardless of whether it is one of the best split AC or a tower AC, the filters are a crucial element of an AC system. It is important to clean out the filters since the air is pushed out from it. Typically, the filters should be cleaned twice a year to ensure that no dust or grime settles on them. In fact, it is one of the easiest and cheapest maintenance techniques for your AC. At times, if the AC is not cooling as effectively as it used to, one can check for a layer of grime on the filter. Upon removing it, the cool air can come out into the room effortlessly. 

3. Clean the AC’s Condenser Coils 

A central AC system will have a condenser coil and an exhaust fan installed outside the home. They must be cleaned periodically before using the AC. Since the condenser coil and exhaust fan are fitted outside the home, they can gather dust very quickly. If they are kept in the yard, they can gather leaves and twigs, which can hamper its smooth functioning. It is essential to clean them out thoroughly before using the AC, lest there be internal damage in the coil because of obstruction by debris. 

4. Check the Coolant Lines 

The refrigerant pipes and tubes run from the AC evaporator to the condenser placed outside the home. They are covered with a foam coolant line insulation. Over time, that lining can get frayed or break. Even in the best AC. So before using the AC in the summer, it is important to check for missing gaps in the lining and reform it wherever necessary. 

5. Check the Thermostat 

The thermostat is used to set the desired temperature of the AC. Sometimes, the thermostat can become old and malfunction. This is easily evident when the AC shows large swings in temperature in a single day. In such cases, it is important to replace the thermostat in order to effectively maintain the desired temperature and also to ensure the smooth functioning of the AC unit. 

6. Test-run the AC 

Before beginning to use the AC regularly, it is important to check that the system is working properly. By ensuring that all the switches and the condenser unit are on, a safety check can be conducted. Upon ascertaining that the cooling system does, in fact, work smoothly, the AC is ready to be used for all of summer! 

Conclusion:

It is important to follow all these steps before regular use to ensure the smooth functioning of the system. 

Looking for REMOVALISTS IN NEWCASTLE, check additional info.