How to Maintain E-Scooters in Five Easy Steps

Do you want your e-scooter to last longer and ensure it is on form all through? When you use your e-scooter regularly, there’s a high chance that it’ll reduce the performance with time. There are some telltales you should consider to know when your e-scooter needs attention. Some of them include moving at a low speed, brakes failure, battery discharging fast, and squeaking. Since your e-scooter plays a crucial role in your transportation around the streets or to work, you may hate seeing it underperform.

According to iscoot.com.au, the best way to always ensure that your e-scooter keeps running is by knowing how best to keep it well maintained. Before you start any ride, there are some critical areas within your e-scooter you should always check for high performance. Let’s look into what you need to do to ensure your e-scooter is well maintained.

1. Clean Your E-Scooter Regularly

Just like cars and bikes need cleaning regularly, you should always wash your e-scooter after use. It would help if you did not clean it using too much water like you’d use when cleaning a car. If you wash your e-scooter with a pressure washer, you may end up spoiling the battery and the inner electric parts. Always use a soft wet cloth to wipe out the dust and scrub the mud that sticks under it with a brush. The wheels can jam when too much dirt and dust accumulate on the ball bearings. Lubricate the ball bearings after cleaning them to avoid wear and tear.

2. Keep the Battery Charged

It is advisable to keep the battery of your e-scooter fully charged. E-scooters use lithium batteries which are light and easy to maintain. To ensure your e-scooter serves you long enough, you should charge around 90% to prolong its lifespan. When the battery stays for long, and the power depletes, you have to give it a lot of time to charge fully. Eventually, the battery will be damaged and fail to charge at 100%. When charging, make sure you use the approved charger to avoid overcharging or undercharging. Unplug your charger when the battery is full since this can lead to overcharging. You can also check offroad electric scooters from CycleBoard.

3. Inspect the Tires

Failing to check on your tires regularly may end up costing you a lot eventually. When the tires wear out, they may damage the inner tube and even fail to move well on wet roads. Inspecting your tires will ensure that you know when it’s right to replace them. Moreover, it would be best if you always kept your tires inflated at the recommended pressure. Keeping them at low pressure can damage the rim, move slow and deplete the battery fast. On the other hand, high pressure than the right one can burst the inner tubes. If your e-scooter has solid tires, consider replacing them if you find that they have worn out.

4. Keep an Eye on the Brakes

When riding your e-scooter, your safety matters a lot. You need to stop wherever you want or even slow down any time you want. In an emergency, your breaks must function instantly to avoid causing accidents. So, how do you ensure your brakes guarantee you a safe ride? Always make sure you check on the performance of your brakes before riding your e-scooter. Adjust the brakes when you find that they are loose to increase performance. Please keep checking the brake pads to replace them when they wear out and lubricate them regularly. The ball bearings may wear out and get clogged if they stay for long without grease. Make sure that the point where the rim and discs are attached is okay and well lubricated.

5. Store your E-scooter Properly

When not in use, your e-scooter will need proper storage. Some weather conditions may not favor you using your e-scooter for transport. It means you’ll have to store it until the right time comes. Remember, as we had mentioned earlier, the lithium battery can get damaged if stored for long without charge. Some parts as well may rust and disfigure your e-scooter. Dust can accumulate on the brake pads or the ball bearings and damage them. It would help if you kept on giving it close attention by cleaning or dusting it off. In addition to that, you should keep your e-scooter at an ideal temperature. Too much heat or temperatures below zero degrees can damage the battery. It’s advisable to keep it indoors under controlled temperatures.

Conclusion

You should maintain your e-scooter for better and safe operation. When you keep it in suitable condition, your e-scooter will serve you a long time. Remember to keep the battery fully charged and have a close check on the tires and brakes. Finally, you must always clean your e-scooter and store it in an ideal place when it’s not in use.


Related Articles

Leave a Comment