Deciding to design and build your makeup vanity setup versus buying one from a retailer or manufacturer is a decision that can be tricky. Whether it’s because you have some needs that need to be customized or the need to have a Pinterest worthy setup, the decision is up to you.
However, we will not throw you under the bus, but give you ideas to help with designing this setup, alongside some of the best tips for shopping in the market today.
Building The Vanity Mirror From Scratch
First, we’ll look at how to make your makeup vanity featuring lights out of raw resources, and then in the following part, we’ll commence with a preexisting piece of wood.
Materials Needed
There are a large number of materials that you can have MatchSourcing consultants inspect and store before having them shipped for your DIY needs. However, we’ll go through the essential materials to keep your budget within range. These include:
- Plywood sheet 28 by 34 inches
- two parts board pieces measuring 32 inches
- Undercoat/primer
- A paintbrush and paint
- a mirror measuring 18 by 30 inches
- Pencil
- Lamp sockets with plug-in cables, 6 pcs.
- Drill
- Screwdriver
- Glue for construction
- Screws measuring 3 in.
- Screws measuring 2 in.
- bungee cords
- Luminaires: bulbs or LED Strips
- Power outlets
Procedure
Source: https://unsplash.com/photos/hdW4rZPHe2g
- First, apply two layers of primer on the surfaces and sides of your 28 by 34 inches plywood sheets, and also the 2 parts 32-inch board. To be safe, set these away for a complete 2 hours to dry.
- After that, you may begin applying the colourful paint. Ensure that this is done equitably in all areas. You may customize your LED vanity table with whatever colour you like!
- Place the plywood pieces on even surfaces, including your floor or a large table (that you don’t mind roughening up a little). Ensure the plywood component is centred. Draw the border with a pencil all around. Set the mirror away in a safe location before resuming your job to avoid damaging it in the process.
- Place the six lamp outlets on the wooden piece. Place three pieces on each side, ensuring that the spacing is even. Make a pencil sketch of their outline.
- Utilizing your drill, drill a 14-inch hole in the middle of each round.
- Set the plywood piece against the wall where you want the vanity mirror to go. Mark each face of the plywood using a pencil.
- Attach the outlets to the plywood panel after inserting the cables through the holes.
- Apply glue to the rear of the mirror and push it against the plywood.
- Using the installation screws, secure the power generation strip beneath the mirror.
- Drill three 1/16-inch holes in each wooden panel. Utilizing your 3-inch screws, secure them to the wall. Check that the painted pieces are pointing away from the middle.
- Drill 4 openings in the wood, one on each side of the wallboards. Use the 2-inch screws to fasten it.
- Plugin the power cable into the 6 electrical connectors. Plug the strip’s wire into an electrical socket when the switch is turned off.
- Insert the led lights into the six sockets. To illuminate your makeup vanity, switch on the power supply switch.
Buying The Vanity Setup
Source: https://unsplash.com/photos/xvOML5tdKMk
If you want a vanity table with a lit mirror but don’t want to deal with the effort of creating one, you should first assess your most important demands before purchasing one from a shop or online. Vanity tables with lights and mirrors may be used for a variety of purposes. Most ladies and girls use it daily and, obviously, for important occasions. Others require it when performing their morning and nighttime beauty routines.
An illuminated vanity mirror provides a significant contribution to this part of a woman’s look, thus knowing how to choose the best one is eventually vital.
A beauty table has two types of mirrors.
- One-sided mirrors have a mirror on a single side and a covering on another.
- Double-sided mirrors feature two sides: a standard mirror on one side and a unique mirror on the other that delivers a magnified view. Simply turn it over to utilize one face or another, depending on your needs at the time.
When selecting a double-sided mirror, consider how enlarged the special mirror should be to make your beauty procedures more pleasant. Today, there is a wide range of magnifications accessible on the market.
General Purchase Considerations
Source: https://unsplash.com/photos/yb9b2wbhxG4
Maintaining clutter is critical in all areas of your house. If you’ve noticed that your beauty hoard is expanding and you lack a decent space to do your makeup, it’s time to acquire a vanity table. Here are some parts you can buy separately to get started.
- Buy a pre-made vanity Mirror
- A high-quality desk from IKEA
- A minimalistic desk for smaller spaces.
- Budget-friendly: Make one using your current mirror and purchase affordable LED lights.
The Bottom Line
In these trying times, budget-friendly DIY projects seem to assist a lot. One such way is by canning/packaging food at home. Buying a nitrogen can seamer/machine, and some packaging is a good way to keep your food fresh for longer.
A well-set makeup desk can keep you in a good place to make the right purchases for a good beauty routine. For your perfume products, consider buying perfume boxes and containers from manufacturers of plastic boxes in China. With that said, go through the article once more for insights that you might have missed the first time around.